PDA

View Full Version : 2118 vs. 2119?



SMKSoundPro
11-28-2008, 01:21 PM
Dear Friends,

I there a significant difference in 2118 vs. 2119?

In my 4735 projects, the 2119 is the quoted driver, but I have 2118's and recone kits in hand. Will the 2118h be a suitable replacement?

I also saw in the "Goes Into" list that each driver has its own recone kit.

I am asking because I am not exactly sure of the differences between the two. Is it just power handling?

Scott.

subwoof
11-28-2008, 01:45 PM
The 2119 has an "improved" vice coil and the magnet has a slightly deeper gap. That's why the kits won't interchange.

For SR use, very little difference would be noticed so swap away.

sub

SMKSoundPro
11-29-2008, 04:07 AM
Thank you!

I will commence swapping.

Eaulive
05-29-2011, 06:13 PM
Ressurecting an old thread, but where can I find more info on the 2119? I thought I was having two 2118 here but after checking they turned out to be 2119s

subwoof
05-30-2011, 10:12 AM
try looking for the M209-8A - same as the 2119 but for some cosmetics and WR cone treatment ( if I remember right )...

Eaulive
05-30-2011, 10:22 AM
try looking for the M209-8A - same as the 2119 but for some cosmetics and WR cone treatment ( if I remember right )...

Thanks, isn't the M209-8A used in the SR-X 47xx series ?