PDA

View Full Version : 128H recone fits 2213 frame?



Serum
11-17-2008, 12:55 PM
Wasn't able to find any information about he air-gap nor the flux density of it of the 128H woofer;

The dimensions of the magnet/faceplate/basket seem to be spot on;

But i can't find any information about the flux density of the 128H. (the 2213H has a 1 tesla density)

Can anyone please tell me if these 2113 frames can be used to be reconed to a 128H?

Allanvh5150
11-17-2008, 10:27 PM
Hi, The 128 kit goes into a 128 only. The 2213 kit is also only for the 2213 frame. Here is the link for the "goes into" list

http://www.jblproservice.com/pdf/Goes%20Into%20List/Goes%20Into%20List.pdf

Hop this helps.:)

Serum
11-18-2008, 09:59 AM
Thanks for your reply, but that list isn't all that;

It doesn't mention the 2235 fits a 2225 basket either and visa versa, which is the exact same frame/cone, except for the mass-ring used on the 2235

I would like to know if the airgap/magnet has the same parameters on both units.