PDA

View Full Version : ALTEC expert needed.....



Woofer
09-08-2008, 07:17 AM
Would anyone happen to know if a re-cone kit, part number 21353-5 is actually an ALTEC please? :o:
I've seen similar numbers that would suggest it is a real part number, but the -5 suffix confuses the issue.
I have come across a pair of ALTEC 420A's that have been re-coned, but the cones are not what they should be, and the only identifying feature on the back of the cone is 21353-5
So, it begs the question, if it is a real ALTEC cone, what does it really belong to? :blink:

Cheers all. :)

ps: I can see through the dustcap's breather hole that they have Aluminium voicecoil formers, if that's any help.

http://img187.imageshack.us/img187/1462/picture9qk5.jpg

http://img413.imageshack.us/img413/3408/picture10um4.jpg

cddeluca
09-08-2008, 08:13 PM
http://www.hostboard.com/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=3729&t=3669

Woofer
09-08-2008, 08:23 PM
http://www.hostboard.com/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=3729&t=3669

.... yes, at least a dozen times over, but thanks anyway. ;)

What I need is one of the 'local' ATLEC Historians here, to have an opinion.

Unfortunately, that post you mention raises more questions rather than answers. :(

This is a question for an ALTEC EXPERT.
So guys, where are you all? :o:
(.... come out, come out, wherever you are????)
:blink: