PDA

View Full Version : I need your Help with refoaming



leberwurst
08-23-2008, 09:28 AM
Hello

I am new in your forum and need some help with refoaming my speakers.
This are 16" speaker like the TAD,s but I cant finde new foams for this
speakers.

Regards

From Germany

boputnam
08-24-2008, 06:08 AM
You too, need to contact Rick Cobb (rcobb@tampabay.rr.com) and see if he can help.

speakerex
08-26-2008, 11:05 AM
Measure the OD (outside diameter) and ID of the original foam. Even if it has disintegrated you can see where it once was. Let me know those sizes and I will give you replacement foam options. You can post again or email me directly → cathy (cathy@speakerex.com).

leberwurst
08-27-2008, 01:08 AM
Hello

Here are the dates


C=390mm
B=370mm
A=330mm
E=320mm
D=20mm

Regards

Piet

leberwurst
08-27-2008, 06:57 AM
Hello

I think a foam for the TAD1602 will work but they sell only recone kits



Piet

speakerex
08-27-2008, 09:32 AM
there really is no good foam option available. You can try to very gently stretch a foam with a 366.70 OD and 306.375 ID or you can try to cut and seam a larger one with a 430.20 OD and 374.65 ID. Neither one is a perfect alternative. sorry I couldn't help more.