Need a bump filter design.

[elshout]

Could someone provide a schematic for a filter with a + 6 db boost at 20 Hz with a Q=2?

Any help would be greatly appreciated.:applaud:

[Hoerninger]

D.B.Keele:
http://www.xlrtechs.com/dbkeele.com/PDF/Keele%20%281972-05%20AES%20Preprint%29%20-%20Vented%20Loudspeaker%20A%20Restatement.pdf
design procedure page 11,
frequency response fig.14.

Helpful? (Don't know the term "bump filter")
___________
Peter

[elshout]

Thanks for the reply Hoerninger. What type of power would this take? Also, what software did you use to create the graph you included in your response?

[Hoerninger]

What type of power would this take? Depending on the opamp about +/-15 V dc. If you will use the one transistor solution Keele mentioned you will come along with a single rail dc of about +20 V.

Also, what software did you use to create the graph you included in your response?I used Electronics Workbench. Other programs will be useful too as the circuit is not complicated. (Spice).
___________
Peter

[scott fitlin]

Bessel and Chebychev filters are bump filters.