View Full Version : JBL D131 ohm ratings?
skydog45
07-29-2008, 07:07 AM
Hey guys,
I'm looking to buy a pair of d131's and I've run across what looks like a nice pair....the gentleman says they are 16 Ohm speakers and yet the drivers were tested and rate 7.5 and 7.2 ohms...
Does this sound right? Sorry I'm a newbie!
spkrman57
07-29-2008, 09:49 AM
Some of the older JBL driver units were listed as 8 ohm and 16 ohm but actually were not.
Hope this helps!
Regards, Ron
grumpy
07-29-2008, 04:28 PM
Re is spec'd at 6.3 ohms (+/- some value), so a little higher doesn't seem
wacky :)
http://www.jblproservice.com/pdf/Thiele%20Small%20Parameters/Theile%20Parameters.pdf
Beowulf57
07-30-2008, 06:14 AM
As well, the DC resistance measurement is not the same as the AC impedance presented to the crossover/amplifier and this varies with frequency. This article will help:
http://en.wikipedia.org/wiki/Electrical_characteristics_of_a_dynamic_loudspeake r
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.