View Full Version : Recommended Bypass Cap values?
Beowulf57
05-26-2008, 10:39 AM
Any recommendations for bypass cap values for 1.5uF, 13.5uF & 16.5uF (all non-electrolytics in JBL N1200S and 3106)? I've used .01uF with 1.5uF.
AltecLansingFan
05-26-2008, 10:56 AM
Any recommendations for bypass cap values for 1.5uF, 13.5uF & 16.5uF (all non-electrolytics in JBL N1200S and 3106)? I've used .01uF with 1.5uF.
I tried many bypass caps over the years, expensive and cheap ones .
Cheap and with very good results, use the (very small) Vishay MKP1837 bypass cap on every cap in your crossover (0.01 uF on every cap)
Price about $ 0.50 a piece or less.
Beowulf57
05-28-2008, 05:37 AM
I tried many bypass caps over the years, expensive and cheap ones .
Cheap and with very good results, use the (very small) Vishay MKP1837 bypass cap on every cap in your crossover (0.01 uF on every cap)
Price about $ 0.50 a piece or less.
Thanks for the suggestion...the Vishays are polypropylene and thus have a good DF?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.