PDA

View Full Version : L-36 Crossover Question



shacky
04-22-2008, 06:35 AM
I was looking at the data sheet on my L-36. Sweep on Woofer data is 30 - 1200. Yet freq crossover is at 1500. Doesn't this leave a gap between 1200 - 1500?

http://manuals.harman.com/JBL/HOM/Technical%20Sheet/L36%20Decade%20ts.pdf

Earl K
04-22-2008, 06:58 AM
Hi,


,,,,,snip,,, Sweep on Woofer data is 30 - 1200. Yet freq crossover is at 1500.

- "Sweep Frequencies , executed at X volts " is factory test information that's published for the sake of JBLs' service techs / so that the service tech. can make a proper determination about the relative health of each transducer .

:)