PDA

View Full Version : C60 Sovereign S8R driver removal question



oldsoundz
01-03-2008, 10:26 AM
I am trying to pull the woofer/passive from a c60 system. I ran into a problem where the grille pegs mount into a wooden block, which is in the way of one screw per driver. The block is held with two staples, and I am assuming also glue? I am trying to collect serial numbers off of the components for registering.

Are there any suggestions on what the best course of action may be? Thanks,

Chris

Maron Horonzakz
01-04-2008, 07:25 AM
I would just forget the registry than go through that hastle.. They had asked for the numbers on a Paragon,,,,No way,,,am i going to swing that around for that.

oldsoundz
01-04-2008, 08:06 AM
Turns out at least the LE15A will need to come out as it needs a refoam.

Of the 4 Sovereigns I picked up, 1 has the older style light colored surround while the other 3 all have the black surround. The 3 newer ones have the block relocated and they do not block the screws.

I am considering trying to drill a hole through the block opposite the screw head but I think the staple is in the way.

Will have to do it either way, just don't want to hurt anything.