PDA

View Full Version : Does anyone have H4338 dimensions?


KromeDome
12-29-2007, 07:04 PM
I am building a set of LCRs, and designing the cabs for a future upgrade to these gems. If anyone has the front dimensions for these, I would certainly appreciate it. Many thanks in advance.

Brian
matsj
12-30-2007, 01:06 AM
WxHxD 549×921×375mm. 3/4" +1" mdf. Can you translate so : http://www.harman-japan.co.jp/product/jblhome/4338.html


mats
Zilch
12-30-2007, 02:35 AM
See also:

http://manuals.harman.com/JBL/HOM/Technical%20Sheet/4338%20ts.pdf
KromeDome
12-30-2007, 06:45 AM
Thank you both, I was actually looking for the H" x W" of the H4338 HF horn itself :).
richluvsound
12-30-2007, 06:58 AM
Krome ,

this horn is very expensive ,very rare and takes a heck of a long time to get .

In hindsight, I would use the h9800 that matsj makes . :applaud: What am I talking about ?:banghead: I have some some and they measure very much the same!

Rich
KromeDome
12-30-2007, 04:17 PM
Krome ,

this horn is very expensive ,very rare and takes a heck of a long time to get .

In hindsight, I would use the h9800 that matsj makes . :applaud: What am I talking about ?:banghead: I have some some and they measure very much the same!

Rich

I guess I didn't realize mats was producing them for fellow members. In that case...I'll look into that! Or I can perhaps wait for him to do a run of H4338's someday :applaud:.

I certainly have much more time than money. :blink:

Thanks for the tip, Rich.


Brian