PDA

View Full Version : 2385A's in Triamp System w/DSP



blackwell
10-03-2007, 02:02 PM
Hi guys,
I'm building a "mostly" JBL system and I want to hear your advice.
Firstly, here is the system:
4-2235's (20Hz - 80Hz) Sub
LCR are
2-2206H (80Hz - 600Hz)
1-TAD 4001 on 2385 (600Hz-10K)
1-077 slot (10K up)

I'm using a DSP Triamp system with 3 channels of B&O ICEpower with a DSP. Into these loads I'll get 500W, 125W, and 125W on the slot (of course I'll turn it down). With this I'm hoping to tame the 2235 horn. I'm hoping that with a very careful treatment of the lower end of the horn I might be able to crossover at 600Hz. The only question I have is if the CD design with it's harsh diffraction slot will generate too much distortion, or will I be running so lightly on that horn that it will be OK??

Thanks
Eric