View Full Version : L250/250Ti Tweeter Bezel

08-29-2007, 09:43 AM
Can one of you guys who own a pair take a couple of measurements?? I am looking for diameter of the flat before the the taper to the baffle and the height of the top of that flat on the top and bottom from the cabinet face. I have loads of pictures but would rather get a good measurement.

TIA Rob:)

08-30-2007, 02:44 PM
I'd say it looks like 5/8" from the speaker tops to the start of the flair out. The flair out starts just as soon as the 1/4 round on the edge ends. The ring of wood around the tweeter is also 5/8". From the top of the frame of the midrange to the flair is 1 and 3/4". Hope this helps.

08-30-2007, 06:14 PM
Yes it did thanks!!! How about 2 more. I am looking for the bezel height off the baffle.


Titanium Dome
08-30-2007, 10:25 PM
I sent this to Rick a while back.

08-31-2007, 04:38 AM
Great Thanks!!


08-31-2007, 05:23 AM
I sent this to Rick a while back.

yes you did. His measurements and description was perfect and exactly what the doctor needed:applaud:

thanks again Doug

BTW...what are you playing with now Rob?

07-03-2008, 10:33 AM
Can any of you L250ti Jubilee owners help me out?? It looks like the bezel on the Jubilee is a different size than a standard L250ti. I am staking rings to take a crack at the bezel but want to confim a couple of measurements. Using pixels in paint shop I come up with a 7/16 ring around the 050 tweeter.

Are the heights of the bezel the same?? They are 1/8 and 13/16 for the standard version.

Thanks Rob:)