PDA

View Full Version : JBL 4333


bjornson
08-25-2007, 06:46 PM
Hello all, I just stumbled upon this forum.
I have a set of 4333/Walnut with all original components that need a new home. I'm the second owner of 17 yrs, and they have been stored for the last five in a dry environment. They were originally purchased by "Boogie" Bob Baldori and installed in Lansing Sound, a studio in Lansing Michigan, as the far field monitors. I purchase them in 1990 and used them until they were replaced by a Meyer 500 system. The veneer is average, grills are in poor shape, and I believe one woofer has a small hole in the cone. All drivers are operational, and the horn lenses are in good shape. I can take some pictures and post if there is any interest.
Please email me @ davebjornson@gmail.com if you are interested.

tweeter
08-30-2007, 04:24 AM
Hi,
any pics are grateful...:useless:

bjornson
12-06-2007, 04:03 PM
Here are some photos!

bjornson
12-06-2007, 04:57 PM
Stop the presses!
I've been contacted about the 15" drivers in these boxes.
I popped both drivers out and found......
1 x 2220H
1 X 2225H
:biting:

I'm guessing thats a bit of a bummer......
I have no idea when they got swapped out, only that it was before I got them. I really need the space in my theater so they have to go.

pelly3s
12-06-2007, 08:04 PM
the 2220 has a 2225 kit installed in it, which isnt right.

Mr. Widget
12-06-2007, 11:32 PM
1 x 2220H
1 X 2225H


I'm guessing thats a bit of a bummer......The 2220H is the bigger bummer... the 2225 can be reconed with a 2235H Kit and be good as new... the 2220H is a different design. You can fit a 2235H kit in there but it will not have the same deep bass response and will have a bit more midbass output. That woofer needs to go the eBay route and a new 2235H or equivalent framed woofer with 2235H kit installed.


Widget