08-23-2007, 05:29 PM
I'm upgrading my N7000 to N8000 x-overs by adding resistors across the outputs and there is two soldering tabs off the HF (+) terminal. One tab has a green wire to the L-pad and the other has a red wire for the L-pad and a coil and capacitor soldered to it. Which tab do i use for the resistor? I'm using Auricap capacitors which are directional and there is an existing cap across the LF (+) & HF (-) terminals. Which terminal do I use for the red wire on the Auricap? Also, what is a good way of mounting air core inductors? I was thinking of mounting them on a small piece of hardboard using cable ties and gluing the hardboard to the inside of the existing can.