PDA

View Full Version : Recone kit for 130A



lu13
06-13-2007, 11:54 PM
Hello,

is it possible to get a recone kit for a 130A? Someone say it is possible
to use the E130 kit?
Where can I get these kits for a good :-) price?
Thx
regards
Ludwig

SMKSoundPro
06-14-2007, 12:04 AM
I am looking at the JBL "goes into" list and see where the C8RE130 recone kit goes into:

M30, M31, M22-8, D130, D130F, D130H, E130-8, E-140-8, K130, 2135, 023101, 023101A, 023101H.

I hope this helps.

Someone else may reply here to help you.

As for where to get kits, I am only aware of a JBL Service Center. JBL does not sell recone kits to consumers here in the USA.

Good Luck!

Scott.

GordonW
06-14-2007, 05:35 PM
130A is ONLY correctly recone-able with the 2220 kit. NO OTHER KIT WORKS PROPERLY in the 130A.

Here's a previous thread where this was discussed:

http://audioheritage.org/vbulletin/showthread.php?t=7427&highlight=130a+2220

Regards,
Gordon.

lu13
06-15-2007, 06:38 AM
Thx, for your quick answers!

I think I have a problem, because I have already two reconed
130A, but there is written on the back, with chalk, E130-8 ( they are with alloy calott)?!
They where reconed in the mid 80īs from JBL Austria in Salzburg! :banghead:
???

regards
Ludwig

SMKSoundPro
06-18-2007, 01:33 PM
I knew someone would be able to give you better information than me.

I was just reading the JBL Goes Into list, and was only listing what a C8RE130 recone kit goes into.

I did not see where the the 130A was listed.

Stick to this list and you will learn something new everyday!!!

Scott.