PDA

View Full Version : Connecting 2405's



BirdmanPA
06-06-2007, 04:37 PM
I am adding a pair of 2405 16 OHM tweeters to my existing S 7R's with a N7000 crossover. Can someone please give me directions for the correct connections from the exixting LE-85, LE 15A crossover. I am receiving the N7000 tomorrow and some of it will probably be obvious, but, since I am not a tech, nor am I very experience with this stuff, I want to make sure I make all of the connections correctly, especially in connecting the new tweeters and crossovers to the rest of the existing system. Also if anyone knows where I can obtain original, or similar new, mounting screws for the 2405's. I have them mounted, temproarily, with 8/32 by 1" SS screws, but would like to keep everything as original as possible. Any help in these matters would, as always, be greatly appreciated.
Jerry.

Robh3606
06-06-2007, 05:01 PM
All you have to do is take the output from the LX-5 that is driving the compression driver and use that as the input to the N7000, You then run the Compression driver/midrange from the Low and the 2405 from the High of the N7000. The link is to the schematic it's all there on the Techsheet

Have Fun

Rob:)


http://manuals.harman.com/JBL/HOM/Technical%20Sheet/S608%20ts.pdf

BirdmanPA
06-06-2007, 07:06 PM
Thank You. Once I am looking at the crossovers, side by side, I am sure it will be easy to follw.
Jerry