PDA

View Full Version : Crossover testing



jcdahl
02-06-2004, 09:36 PM
What is the best way to test my LX5 and N7000 in the Paragon I am restoring?

I don't have very sofisticated test equipment at my disposal.

Thanks
JCD

Alex Lancaster
02-07-2004, 06:40 AM
JC:

You have really sophisticated test equip., Your ears!, next step, a signal generator, or a test CD, and a scope.

Alex.

4313B
02-08-2004, 09:12 AM
You can run a voltage drive on them.
Here is the Standard Test Fixture (http://www.jblproservice.com/pdf/Network%20Schematics/Standard%20Test%20Fixture.pdf).

The test specs should be found in these schematics:

LX5 (http://www.jblproservice.com/pdf/Network%20Schematics/LX5.pdf)/3115 (http://www.jblproservice.com/pdf/Network%20Schematics/3115%20Network.pdf)
N7000 (http://www.jblproservice.com/pdf/Network%20Schematics/N7000.pdf)/3105 (http://www.jblproservice.com/pdf/Network%20Schematics/3105%20Network.pdf)

I would probably just replace all the caps and resistors with new caps and resistors.

jcdahl
02-09-2004, 01:18 AM
Thanks for the fast responses and great information.
JCD