PDA

View Full Version : Let's try this



Reconer
01-12-2004, 05:17 PM
Ok, can someone here agree that my Dukane 5A350 is the same as an LE175/2410 based on the attached file? If so, do you see any problem with crossing it with an N2400? What was the recommended crossover point for the LE175?

Lastly, how do I get a picture of my prized L200/L300 conversion speakers to show next to my name when I post here?

Sorry, I'm a rookie on this site.

Thanks,
<<JJ>>

boputnam
01-12-2004, 07:20 PM
Originally posted by Reconer
how do I get a picture of my prized L200/L300 conversion speakers to show next to my name when I post here? Hey, JJ...

Go here - avatar Instructions - Link (http://audioheritage.csdco.com/vbulletin/showthread.php?s=&threadid=818)

Don posted this, to help the needful. Come back if it still doesn't work... ;)

subwoof
01-12-2004, 08:19 PM
Hello! You are correct on the dukane / jbl issue. I used to sell *both* when working as a service tech for a dealer - it was sometimes a lot easier to get parts from dukane than JBL then...:)

I even have the original spec sheets for the dukanes somewhere.

The crossover would work but any crossover point is dictated by the driver *and* the horn cutoff. Do NOT run that aluminum diaphram below 1000 for any reason - that means it's -12db with a passive JBL 2000hz crossover.

look here for the 2410 / LE175 / 5A350 specs:

http://www.jblpro.com/pages/obsolete.htm

bookmark this page....:)

sub