PDA

View Full Version : Wealth of JBL Information



kingjames
02-13-2007, 11:20 AM
Everytime I went to JBL to look up a certain speaker such as the 4311,etc; I could never find anything. While searching the internet I came across this link by accident. This is a good link with tons of info.The files are in PDF format.you will need Adobe Reader to open these files.


http://www.jblpro.com/pages/obsolete.htm

BMWCCA
02-13-2007, 01:39 PM
I've got that source bookmarked, too. But can someone who's owned or owns a pair of 4410As answer a nagging question? The 4400-series specification sheet here: http://www.jblpro.com/pub/recording/4400.pdf (http://www.jblpro.com/pub/recording/4400.pdf)
shows the 4410A as having the same cabinet dimensions as the 4412A: (14.25 x 23.5 x 11.76 in). And nearly the same weight, too. The product brochure tells a totally different tale, here: http://www.jblpro.com/pages/recording/4400.htm
(17 1/4 x 12 x 11 5/8 in). Which is correct?

Chas
02-13-2007, 01:49 PM
This is great resource and if I recall, a little difficult to navigate to, good idea to post a link -thanks.

I wonder why there is no info on the 2122H? Anyone have a data sheet they could post?

grumpy
02-13-2007, 01:59 PM
http://audioheritage.csdco.com/vbulletin/showthread.php?t=10637

SEAWOLF97
02-13-2007, 03:19 PM
I've got that source bookmarked, too. But can someone who's owned or owns a pair of 4410As answer a nagging question? The 4400-series specification sheet here: http://www.jblpro.com/pub/recording/4400.pdf (http://www.jblpro.com/pub/recording/4400.pdf)
shows the 4410A as having the same cabinet dimensions as the 4412A: (14.25 x 23.5 x 11.76 in). And nearly the same weight, too. The product brochure tells a totally different tale, here: http://www.jblpro.com/pages/recording/4400.htm
(17 1/4 x 12 x 11 5/8 in). Which is correct?

I have 4410s & 4412s . Yup, both same sized cabinet. different veneers. 4412 is 4 pounds heavier.

BMWCCA
02-13-2007, 03:29 PM
That's what the sheets say for the early versions (non-A, wood-veneer cabs), but when you go to 4412A and 4410A (vinyl only, no X-over adjustment) there seems to be some confusion. I'm guessing it's a misprint but with the 10's going nearly as low as the 12's, maybe they do use the same size cabinet. Not that that would make any sense at all for why the 10's exist if they don't at least save some space. S'pose they shrunk 'em for the "A" series run?

Chas
02-14-2007, 12:40 PM
http://audioheritage.csdco.com/vbulletin/showthread.php?t=10637

Thanks, now - why didn't I ever see that? Doh...:banghead: