View Full Version : need screws
Hofmannhp
01-30-2007, 04:32 PM
Hi Folks,
I'm looking for some screws (about 20 pcs) 1/4-20 x 1-1/5 RDH black
thanks in advance
HP
loach71
01-30-2007, 05:04 PM
This was mentioned in another thread.
* Just buy the hardware you need.
* De-grease it with brake cleaner.
* Go to a firearms shop -- but some cold bluing agent.
* Follow the instructions on the bottle.
* Apply the bluing agent to your hardware.
* Rinse the hardware in warm water.
* Dry the hardware
* Apply a light film of motor oil to inhibit rust.
* You now have some nice black / blue hardware.
macaroonie
01-31-2007, 06:46 PM
Metric M6 is approx 1/4 and you can get holochrome in Allen (hex) or Pozi drive in chrome, satin, black, etc. Just replace your T nuts or inserts with metric also. Keine eurocents. Schottischpriese
loach71
01-31-2007, 08:01 PM
Metric M6 is approx 1/4 and you can get holochrome in Allen (hex) or Pozi drive in chrome, satin, black, etc. Just replace your T nuts or inserts with metric also. Keine eurocents. Schottischpriese
MAC - would not the Scottish price be a 26 oz. of the favourite highland malt? :D
yggdrasil
02-01-2007, 11:46 AM
Hanspeter have you tried rsonline? I believe they have about anything you'll need, and have german web-shop.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.