help to replece 2418H-1 on jbl eon15

[armando]

I need help to replece 2418H-1 h.f. diaphragm on jbl eon 15 and were i bay this diaphragm.

[Zilch]

http://www.jblpro.com/pages/contacts/intleuro.htm

You probably need only to have a new diaphragm installed, not a new driver.

[armando]

how can i replace the diaphragma H.F. on jbl 15 eon?

[hjames]

How can i replace the diaphragm H.F. on jbl 15 eon?


Its not exactly the drivers you mentioned, but once you get the driver off the back of your horn and out of the cabinet, I suspect these pictures will give you an idea of what it takes. Then you can decide if you want to try it yourself, or (recommended) send it off to a shop for replacement.

By The Way - I do NOT do this work normally ...

http://www.audioheritage.org/vbulletin/showpost.php?p=100289&postcount=1
(http://www.audioheritage.org/vbulletin/showpost.php?p=100289&postcount=1)

[Guido]

I need help to replece 2418H-1 h.f. diaphragm on jbl eon 15 and were i bay this diaphragm.

Send me a PM. I can sell you the diaphragm but recommend to ship me the driver for replacement in my workshop.

It would be cheaper to bring it to a JBL expert near you. But I'm not sure where to find in Portugal.

[edgewound]

I need help to replece 2418H-1 h.f. diaphragm on jbl eon 15 and were i bay this diaphragm.

Since you said specifically 2418H-1, that tells me you have the EON15-G2 internally biamped unit.

Typically if the compression driver failed, the high frequency section of the amp module failed as well, and burned up the voice coil of the 2418H-1

If you just replace the diaphragm you might destroy the new one too. Chances are the amp module should be replaced too.

Seek an Authorized JBL Servicer for this procedure. You might save some frustration, time and money.