PDA

View Full Version : jbl 4320 tom help me



sgaggy
12-10-2006, 06:04 AM
i purchasrd jbl 4320 whith,bullet tweter,i am very happy the sound whith convergent sl1 and mark levinson ml 2 is wonderful,TOM what kind of crossover i use for 2405 tweter .please help me.
minchia what speakers.......this is very jbl sound,thank you vito from bari italy.:applaud:

hjames
12-10-2006, 07:32 AM
I purchased jbl 4320 with bullet tweeter, I am very happy the sound with convergent sl1 and mark levinson ml 2 is wonderful, TOM what kind of crossover I use for 2405 tweeter .please help me.
minchia what speakers.......this is very jbl sound,thank you
vito from bari italy.:applaud:

Hi Vito - good morning!

The JBL 4320 came stock with:

Lo Freq - 2215 (Pro version of LE15)
Mid Freq - 2420 (Pro version of LE85)
Crossover 3110
Horn 2307 (short horn)
Lens 2308
And was last made in 1974

Some folks might add a bullet tweeter (075s/2402s - home version/pro version but same driver) - I added a slot tweeter (077s/2405s - home version/pro version - very similar driver) a bit newer tweeter, to mine.

The original upgrade concept for those speakers was to take the high frequency output of your original #3110 crossover and feed that to a "high-split" network that would give you a hi-mid output for the horn driver and a very high freq for ther tweeter. They usually used a 3106 crossover for this "high split" technique -
(see this thread (http://audioheritage.org/vbulletin/showthread.php?t=2360)for more details) - (http://audioheritage.org/vbulletin/showthread.php?t=2360)(also see this thread). (http://www.audioheritage.org/vbulletin/showthread.php?t=9273)

I figured the old capacitors in my original 3110 networks could use updating, so I just built new crossover networks based on an updated design Giskard posted to the forums here. (http://www.audioheritage.org/vbulletin/showthread.php?t=9796&page=3)

It all depends on how geeky you want to be, and what you want to do with them! Good luck!

Fangio
12-10-2006, 08:50 AM
i purchasrd jbl 4320 whith,bullet tweter,i am very happy the sound whith convergent sl1 and mark levinson ml 2 is wonderful... minchia what speakers.......this is very jbl sound
:useless:

TOM what kind of crossover i use for 2405 tweter .please help me. thank you vito from bari italy.:applaud:Vito, greetings to italy, I suppose those aren't too common there - congratulations. I've always liked that cabinet style, Heather's came out very nice too. It's been mentioned here several times those deep enclosure types do sound less like a 'box', its an advantage by design. Hope some more xover xperts will chime in here soon. Good luck.

Tom Loizeaux
12-10-2006, 12:06 PM
I heard someone calling!

HJAMES has correctly posted the 4320 stock info.
When I added 2405 slots to my 4320s I bought a pair of 3106 crossovers. They cross at 8K. If you want to use the 2402 bullets, I think the 3105 is the correct crossover. Can someone conform this for me?
The 2402 will work fine, but you'll get more high end extension with the 2405. The 2420 compression driver can certainly go up to the 8K of the 3106.
Hope this helps.

Tom

Zilch
12-10-2006, 01:13 PM
http://audioheritage.org/vbulletin/showthread.php?p=3067#post3067

The difference is the mid driver, not the UHF....

sgaggy
12-11-2006, 01:08 AM
thamk you ragazzi for help.

sgaggy
12-12-2006, 02:55 AM
can i biamp with two yamaha mx-50 ,my jbl 4320 without active crossover.

sgaggy
12-12-2006, 04:55 AM
I heard someone calling!

HJAMES has correctly posted the 4320 stock info.
When I added 2405 slots to my 4320s I bought a pair of 3106 crossovers. They cross at 8K. If you want to use the 2402 bullets, I think the 3105 is the correct crossover. Can someone conform this for me?
The 2402 will work fine, but you'll get more high end extension with the 2405. The 2420 compression driver can certainly go up to the 8K of the 3106.
Hope this helps.

Tom
sorry tom but 2405 h i 8 or 16ohm.

sgaggy
12-12-2006, 07:13 AM
sorry but there is difference if i use 2405h slot tw 8ohm with 3105 crossover.

Tom Loizeaux
12-12-2006, 07:26 AM
sorry but there is difference if i use 2405h slot tw 8ohm with 3105 crossover.

No, I belive it will just bring in the slot a little sooner (lower).

Tom

sgaggy
12-12-2006, 08:06 AM
tom,listen,my speakers have cross 3110.n 7000,and 075 bullet,i purchased 2405h 8 ohm,is a good possibilities that i mount the tweter .mid is 2420,2307.
ancora thank you.

Tom Loizeaux
12-12-2006, 08:22 AM
tom,listen,my speakers have cross 3110.n 7000,and 075 bullet,i purchased 2405h 8 ohm,is a good possibilities that i mount the tweter .mid is 2420,2307.
ancora thank you.

Yes, I think you could switch out the 2402 bullets for the 2405 slots and adjust the L Pads to fine tune levels.

Tom

sgaggy
12-12-2006, 10:28 AM
thank you the great tom and thank you to all of forum.
mille grazie ragazzi.

Tom Loizeaux
12-12-2006, 02:05 PM
SGAGGY, Where exactly is Bari ?

Tom

sgaggy
12-13-2006, 01:12 AM
in south of italy,puglia.

sgaggy
12-13-2006, 03:36 AM
tom is not possible biamp in passive way the jbl 4320?

sgaggy
12-13-2006, 04:04 AM
tom for you and all of this forum,shock.....minchia.

http://www.youtube.com/watch?v=gvWM46kyY5s
http://www.youtube.com/watch?v=vlqfr9wv_X4
http://www.youtube.com/watch?v=EYKz-Pg_KD0
http://www.videohifi.com/forum/icon_smile_cool.gif