PDA

View Full Version : Refreshing the 31XX crossovers


jbl4ever
11-24-2006, 06:52 PM
http://dmbshare.org/pictures/20061124/1.jpg
http://dmbshare.org/pictures/20061124/2.jpg
http://dmbshare.org/pictures/20061124/3.jpg
http://dmbshare.org/pictures/20061124/4.jpg
http://dmbshare.org/pictures/20061124/5.jpg
http://dmbshare.org/pictures/20061124/6.jpg
http://dmbshare.org/pictures/20061124/7.jpg
http://dmbshare.org/pictures/20061124/8.jpg
http://dmbshare.org/pictures/20061124/9.jpg
hjames
11-24-2006, 07:42 PM
Very Nice - thanks for the insight!
jbl4ever
01-11-2007, 08:15 PM
3143 crossovers updated. Tight fit in the bottom half. Glue softens at 250
to 275 and liquifies around 325 degrees. Make sure if using hot plate that
it is teflon coated. Be careful as the glue will burn you if not handled
properly. Use a oven mit

http://dmbshare.org/pictures/20070111/1.jpg
http://dmbshare.org/pictures/20070111/2.jpg
http://dmbshare.org/pictures/20070111/3.jpg
http://dmbshare.org/pictures/20070111/4.jpg
http://dmbshare.org/pictures/20070111/5.jpg
http://dmbshare.org/pictures/20070111/6.jpg

http://dmbshare.org/pictures/20070111/10.jpg
http://dmbshare.org/pictures/20070111/11.jpg
http://dmbshare.org/pictures/20070111/13.jpg
http://dmbshare.org/pictures/20070111/14.jpg