View Full Version : Front grill pegs
clh1997
10-14-2006, 02:38 PM
The front grill pegs on my L166s are damaged – one is all gone and others are half (se picture).
How do I remove them with out damaging the wood/surrounds? And who sells new ones?
I think the same type was used for a lot of different JBLs, so it should be possible to get original ones – or at least identical pegs.
Zilch
10-14-2006, 03:09 PM
A seller on eBay frequently lists them, along with an extraction tool....
You can easily get replacements. Not the same, but they work ok. I would use a drill with a little smaller bit to remove them.
Edwards
10-16-2006, 11:28 AM
As for the removal, you can always drill a pilot hole and use a wood screw to perform the extraction, or you can purchase this guys tool.
He has the pegs for you as well.
http://cgi.ebay.com/JBL-Grill-Pegs-for-mounting-Grills-on-Vintage-Speakers_W0QQitemZ9710999445QQcategoryZ61336QQssPa geNameZWDVWQQrdZ1QQcmdZViewItem#ebayphotohosting
I'm not affiliated with this man whatsoever..but I do need to order a few replacement pegs my self..
Ed
SEAWOLF97
10-16-2006, 11:53 AM
$10 for all 4 shipped
redondotom
10-18-2006, 12:48 PM
$10 for all 4 shipped
I don't think thoes will work on the L-166
clh1997
10-20-2006, 07:15 AM
I don't think thoes will work on the L-166
You're right. The ones I pulled out on the L166 has the same diameter all over (both the part thats sits in the front and the part that stick out).
redondotom
10-20-2006, 02:03 PM
You're right. The ones I pulled out on the L166 has the same diameter all over (both the part thats sits in the front and the part that stick out).
I have lots of the grill pegs you need!
[email protected]
northwood
10-20-2006, 10:58 PM
CLH1997 is a handsome guy
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.