Difference between D8R2405 and D16R2405 ?

[spirou38]

Hi all,

Is there any difference between D8R2405 and D16R2405 diaphragms ?

I was told they are both the same and they are 8 Ohms. Is it true :blink: ?

Thank you for your help.

Pascal

[Mr. Widget]

Do you have a diaphragm labeled D8R2405? I have only seen them labeled D16R2405. Here is a link comparing the impedance of 4 slot tweeters. Two were labeled 8 ohms and two 16 ohms. They were all mint and factory sealed. These four drivers have essentially the same impedance... as far as I know there has never been an actual "16 ohm" version.

http://audioheritage.org/vbulletin/showpost.php?p=62922&postcount=51


Widget

[spirou38]

Do you have a diaphragm labeled D8R2405? I have only seen them labeled D16R2405. Here is a link comparing the impedance of 4 slot tweeters. Two were labeled 8 ohms and two 16 ohms. They were all mint and factory sealed. These four drivers have essentially the same impedance... as far as I know there has never been an actual "16 ohm" version.

http://audioheritage.org/vbulletin/showpost.php?p=62922&postcount=51


Widget

Hello Mr Widget,

I posted that question because I have 2405's labelled 8 Ohms and others 16 Ohms. I ordered a D8R2405 and Harman France sent me a D16R2405. So I wondered if I received the good one. Finaly that's a good thing that there is just one kind of imedance :D
Thank you Mr Widget :applaud: