PDA

View Full Version : L65 network



Jakob
05-04-2003, 01:09 PM
Hi!
I'd like to take a look at the L65 Jubal network specifications. Could anyone please send me those + feedback reg. its qualities?

Thanks,

-Jakob

4313B
05-05-2003, 12:58 PM
L65 Variants

4313B
05-05-2003, 01:00 PM
LX30 network

This is the LCS (Loudspeaker Component Series) version of the L65. It's designation was the S21. It could be purchased with or without the EN3 enclosure back in the late 70's and early 80's. Highlights were the vertical array of the EN3, getting all the components up off the floor, and the 4-inch voice coil of the 124/2203.

This link has some notes about the S21:

http://www.lansingheritage.org/html/jbl/catalogs/1979-comp.htm

specifically page 6

This link has some notes about the EN3:

http://www.lansingheritage.org/html/jbl/catalogs/1980-pro.htm

specifically page 13

Jakob
05-06-2003, 04:14 PM
Thanks Giskard! You're the man!

Nightbrace
02-15-2006, 06:48 PM
Giskard, do you think that the EN3 would work well enough with L112 components and these crossovers? Or I should ask, if you had EN3's. what would you put in them?

4313B
02-15-2006, 08:35 PM
The EN3 will work with the L112 components. You'll need to route out the 077/2405 hole though. The L100t3 components would also work.

Nightbrace
02-15-2006, 08:39 PM
what other tweeters will work without modifying the cabinets? 077/075 are bit too rich for my blood. And not worth it from what I hear.

Nightbrace
02-15-2006, 08:40 PM
Also will the LX30 network work well with these cabs?