porschedpm
04-30-2006, 04:07 PM
These were listed on eBay. They look like the seller did a good job on them but I keep asking myself "why ?". I figure he must of had the parts laying around.
http://cgi.ebay.com/Vintage-JBL-L100s-Rebuilt-W-EV-Horns-X-celnt-Sound_W0QQitemZ9720242523QQcategoryZ61380QQrdZ1QQc mdZViewItem
Quote from listing:
"....The baffle boards are custom gray fleckstone painted. The worst of the cabinet distress has been repaired, but a small amount still shows, see photos. You might also note they have been mirror imaged for good sound balance as well. The original Aquaplas coated JBL Alnico 123-A woofers are in these and sound like the classic JBL L100 low end. The upper part of the cabinet was gutted and reinforced wood reinstalled. The well known ElectroVoice 8HD metal horn body was used with a very smooth vintage 1” Alnico Atlas driver. Topping out the high end is the (again) well known ElectroVoice T-35 tweeters. All three drivers are mated to a custom built crossover @ 1000hz/ -6db/oct (bass),1000hz -12db/oct (mid), 5500hz -12db/oct (mid) and a 5500hz -12db/oct twtr with level controls for the mid and tweeters. In my estimation this is the next logical choice to advance the excellent JBL L100 design....."
http://cgi.ebay.com/Vintage-JBL-L100s-Rebuilt-W-EV-Horns-X-celnt-Sound_W0QQitemZ9720242523QQcategoryZ61380QQrdZ1QQc mdZViewItem
Quote from listing:
"....The baffle boards are custom gray fleckstone painted. The worst of the cabinet distress has been repaired, but a small amount still shows, see photos. You might also note they have been mirror imaged for good sound balance as well. The original Aquaplas coated JBL Alnico 123-A woofers are in these and sound like the classic JBL L100 low end. The upper part of the cabinet was gutted and reinforced wood reinstalled. The well known ElectroVoice 8HD metal horn body was used with a very smooth vintage 1” Alnico Atlas driver. Topping out the high end is the (again) well known ElectroVoice T-35 tweeters. All three drivers are mated to a custom built crossover @ 1000hz/ -6db/oct (bass),1000hz -12db/oct (mid), 5500hz -12db/oct (mid) and a 5500hz -12db/oct twtr with level controls for the mid and tweeters. In my estimation this is the next logical choice to advance the excellent JBL L100 design....."