DavidF
03-25-2006, 04:11 PM
I would like to find a home for this pair of cabinets I made. I am on to another project and will not be using these. No cost but does not include any drivers or crossover. Located in South Bay near San Francisco. I ask only that you come (with a truck or van or such) on a weekend and pick them up at my place in east San Jose.
Designed around the JBL L112 components. The tweeter mount is back-of-baffle to fit the 044 or 044Ti (and will require major modification to refit another model). The mid mount will handle the LE5-6,8,10,12, 11, 2105H, 104H, 104H-2/3. The woofer will mount the 128H but I do not know if other 12” models will fit in without modification.
Cabinets are sturdy with much internal bracing. Front baffle 1 “ MDF, sides are ¾” oak ply, back is ¾” MDF. Top and front trim are solid oak. Overall appearance is very good but I built them so I am bias. Interested party should expect some work to these cabinets for his/her particular application. Small imperfections: baffle with semi-gloss finish (suggest repaint to satin) shows some surface unevenness that was not apparent prior to finishing; Two nicks on the same side of one speaker; one speaker is actually a fraction of an inch taller; some small scratch and dings visible on close inspection in the glare of light; midrange sub-enclosure probably should be of different dimensions for optimum effect.
Height is 39.5”, width is 17”, top depth is 10.25”, bottom depth is 13.75”. Internal volume approx. 2.7 cu. Ft. Weight… I don’t know, but quite heavy. Vent is on back panel and is 3” pvc pipe. This can be easily pulled out and changed to a different length. Terminal board can accept custom crossover installation or retain the three-terminal-out for outboard crossovers.
If someone wants a full kit project we can discuss a deal on purchase of drivers- some or all- to fit the cabinets. I have all oem parts for the L112. Purchase of parts strictly optional. Cabinets alone are free.
Please pm.
DavidF
That object in the upper left on bottom picture is paper taped to the cabinet that I should have removed for the picture.
A few more pictures available if anyone is interested.
Designed around the JBL L112 components. The tweeter mount is back-of-baffle to fit the 044 or 044Ti (and will require major modification to refit another model). The mid mount will handle the LE5-6,8,10,12, 11, 2105H, 104H, 104H-2/3. The woofer will mount the 128H but I do not know if other 12” models will fit in without modification.
Cabinets are sturdy with much internal bracing. Front baffle 1 “ MDF, sides are ¾” oak ply, back is ¾” MDF. Top and front trim are solid oak. Overall appearance is very good but I built them so I am bias. Interested party should expect some work to these cabinets for his/her particular application. Small imperfections: baffle with semi-gloss finish (suggest repaint to satin) shows some surface unevenness that was not apparent prior to finishing; Two nicks on the same side of one speaker; one speaker is actually a fraction of an inch taller; some small scratch and dings visible on close inspection in the glare of light; midrange sub-enclosure probably should be of different dimensions for optimum effect.
Height is 39.5”, width is 17”, top depth is 10.25”, bottom depth is 13.75”. Internal volume approx. 2.7 cu. Ft. Weight… I don’t know, but quite heavy. Vent is on back panel and is 3” pvc pipe. This can be easily pulled out and changed to a different length. Terminal board can accept custom crossover installation or retain the three-terminal-out for outboard crossovers.
If someone wants a full kit project we can discuss a deal on purchase of drivers- some or all- to fit the cabinets. I have all oem parts for the L112. Purchase of parts strictly optional. Cabinets alone are free.
Please pm.
DavidF
That object in the upper left on bottom picture is paper taped to the cabinet that I should have removed for the picture.
A few more pictures available if anyone is interested.