View Full Version : Banquox Sound

Roger Ingram
03-22-2006, 06:10 AM
I'm hoping somebody can help me out here. I have a pair of Banquox Sound speakers, and I'm trying to find some specs on them. I've searched the net, and only came back with one hit, from this site. It seems that they were made locally, in Winnipeg, maybe in the 80's, using JBL pro components. I remember using a set of pro series Banquox speakers when I was a DJ, but these are definetly made for the home market.

They are about 20" high, oak finish over a 1" particle board enclosure. They look great. There are a three way speaker, with high and low cross over adjustments on the back. If anyone can shed some light on these, I would appreciate it. Let me know if you need more details.


Titanium Dome
03-22-2006, 06:21 AM
Usually the first thing we want is a picture. Can you post one?

Ken Pachkowsky
03-22-2006, 07:34 AM
I'm hoping somebody can help me out here. I have a pair of Banquox Sound speakers, and I'm trying to find some specs on them.


I will locate and send Henry Kriendler's email address. He was the owner of Banquox Sound and could probably answer your questions. Give me a couple of days to track it down. I had some correspondence with him last year.


Don McRitchie
03-22-2006, 07:53 AM
Henry is a member of this forum, although he is only around infrequently. You can try the Private Messaging feature of this forum to try and contact him.

03-22-2006, 09:45 AM

jim campbell
03-23-2006, 10:37 AM
let me know if you run across any of those 15 inch banquox bass amp cubes.

03-23-2006, 03:08 PM
I have 2 different pairs of Banquox cabinets what exactly are you looking for???

jim campbell
03-23-2006, 07:08 PM
banquox made cubes way back when 24"wide 22"high,and18"deep.there is a horizontal port across the bottom front and they were loadedwith some ungodly looking 15" with a square shaped magnet.i had a pair back when someone in the band informed me that we had to "look good on stage"which meant wearing spandex and also putting an abrupt end to my musical career.i have found 3 of these over the years in various states of disrepair at yard sale prices.i used to see these things piled on top of the big w bins and under the mids in bar band pa's.2x15 boxes were just too much of a pain to lug around and these werent too bad.i may not have looked good on stage but i could muscle heavy gear into a van.if anyone spent any time at all in winnipeg bars during the early eighties you would have had to have seen lots of these.the smilies re pix will do no good as i have none to upload

03-23-2006, 07:54 PM
Well from what you describe that sounds like 1 of my 2 pairs of Banquox cabinets. I Also have 2 pairs of cabinets that contained Altec 811+511 horns.:)

jim campbell
03-23-2006, 09:14 PM
is that old pa stuff? what do the cubes have inside.what are your plans for them?

Roger Ingram
04-04-2006, 05:40 AM
The cabinet is 10.5" x 20.5" x 8". The woofer is 8", the mid is 5" and the tweeter is 3.5".

Roger Ingram
04-04-2006, 05:53 AM
I've managed to find some information on my speakers. Looks like the components are made by KEF. Although these are not high powered speakers, they are of good quality. Here is a link to some more information if anybody is interested:



Mr. Widget
04-04-2006, 08:31 AM
Well the tweeter is definitely a Phillips tweeter... they were quite popular in the mid to late 70's and found there way into many speaker systems from all over the world.

The other drivers may be KEF, looking at the dustcaps they look more like older Peerless models to me.


Earl K
04-04-2006, 10:03 AM

- The links that Roger included, quite clearly indicate that the midranger & woofer come from KEF stock.
- I agree with Widget, that the tweeter is a Phillips. Most likely , either a AD0162T8 ( polycarbonate dome ) or a AD0163T8 ( "soft-dome" of sorts ) .


04-04-2006, 12:27 PM
Hi Roger Try contacting Creative Audio on Osbourne in the village, they might be able to supply more info on that system. I am pretty sure they put those out under the Banquox label. Creative audio spun off of Banquox audio to concentrate on home HI-FI. Banquox remained a pro sound dealer. Creative audio later switched to using there own name on the systems as they established their own identity.:blink:

Roger Ingram
04-04-2006, 02:31 PM
Thanks for all the feedback. My main goal with these units was just to find out a little bit more about them, specs, etc. I'll stop in at Creative Audio and see if they know anything about them, always a cool place to check out.

Michael Smith
04-04-2006, 07:27 PM
I agree with Widget the tweeter is a Phillips, and the bass & mid are KEF, what a kick in the bolluox.

Roger Ingram
04-05-2006, 06:38 AM
Forgive my ignorance, although I can appreciate the technical specs, I'm not too much of an audiophile. I've only heard of KEF before, and I would regard them to be good. It may be hard to tell from the pictures, but each component has it's own chamber, and there is an ample amount of insulation (cotton?) for dampening. Oh, and these speakers are solid and quite heavy for their size.

Most places selling audio equipment usually only push specs like wattage (total power more than RMS). These KEF components are only 50watts, and I am mating them to a Yamaha amp with 110watts. I don't plan on ever cranking this system up, but I like to have the extra power to available to drive these units so that I can avoid distortion when the volume is turned up. Make sense?

Should I be concerned about the low wattage on these units? Would you consider these speakers to be of good quality?

Thanks in advance,


06-07-2006, 07:42 AM
Hi Roger. My name is Henry Kreindler - former owner of Banquox Sound.
I am the person who designed and built these speakers- probably around 1974. Sorry to take so long to reply. I have not been on the forum for a long time.
The speakers you have were identified by the previous members. Yes, they are KEF B200 woofer, KEF B110 mid and Phillips AD0162 tweeter. Good going guys. This system is avery rare Banquox system. I think I only built half a dozen pairs - or less. I do not remember the crossover network details, but I think they are 6db/octave - crossed over at 800hz and 4khz. (i'm not absolutely sure of that). There may have been a KEF T27 tweeter originally, but I replaced it with the Phillips tweeter for better power handling. The system should be able to handle the Yamaha power amp - as long as the amp is not driven into clipping. If you need to get hold of me directly, my email address is hkreindler@shaw.ca.

jim campbell
08-13-2016, 02:39 PM
Well from what you describe that sounds like 1 of my 2 pairs of Banquox cabinets. I Also have 2 pairs of cabinets that contained Altec 811+511 horns.:)pix ......73123only took ten years to figure how to upload73124....the two 1x15's appear to have started out life as a 2x15,similar to the other one only 18" deep instead of 15"..one is a peavey black widow and the other is an ancient marsland ,probably rescued from an old kustom...the 2x15 has 2 k140's and i found it for 200 bux:D.....they may even be two of the 4 k140's i sold to banquox decades ago,when my motorcycle was sick and needed parts:banghead:....