Activity Stream

Hi Clark, That is really interesting and thank you for explaining it. Looking at your narrative what does the massive growth and...

It is actually possible for the mid-range to be bad even though the continuity through the coil is good. In your particular driver, it's the most...

An audiophile is a person who likes audio. That's all it means.

Hey Ed, Just talked to a friend today who also attended. He mentioned a room of "Not For Sale" gear that he really liked. He thought maybe some of...

Colleagues, In a feeble attempt to get this thread back on track , I would offer the following; but first I wish to thank the well wishers who...

It is a throatless driver. Look at page 2 crossection you might be able to use it to determine what it might be. Whatever in may be it is a very...

It depends on the horn that is on it. Sorry I do not understand the question...

Still the most hypnotic atmosphere in German Krautrock. Listen to "Spoon" B4 (over and over). https://www.youtube.com/watch?v=l6PH7a4RptU Superb...

For the record, there are actually six 'bridges' on the switch connections, per the schematic and the PCB. It looks like Dev has already figured...

thank you I will take a look ..

NL.. Those look like Neutrik connectors? Are they one in the same? The passive pro JBL subwoofer I saw online seemed to have a 1/4 input. Least...

https://www.audioheritage.org/vbulletin/showthread.php?37054-restoration-project-on-JBL-4310

How do you plan on getting the crossover out without removing the woofer?? The mid is in a sealed sub-enclosure. The whole enclosure is not stuffed....

Thanks for the quick response. I have the 4310 monitors. There are two controls on a narrow panel at the bottom of each cabinet. I have...

PRX815XLF are pretty compact, light, and self powered with outputs that have switchable hpf outputs if needed Friend of mine uses a pair of...

All the JBL pro subwoofers I'm familiar with use 18" drivers and aren't what I'd call small. A speaker that uses a 1/4" jack for its input isn't...

Hello For starters take out the woofer and find the location of the network. If it is like a 4311 there should be a box where the speaker leads go...

Hi, I just finished a 4343 build this spring. There are several other builds documented on this forum. This post helped me tremendously in getting...

I think it stands to reason that if the artist is not engaging the rest is not going work out. It is the recording's task to capture that and move it...

Hmm, guess I'd have to look into the FDS360 then. Funny, I do have an old computer which runs XP, but I haven't used that computer since I was a...

it is stock my drivers have them as well Rob :)

The common denominators between these individuals and my experience of them comes from either personal contact with them or experience with the...

Hi Clark, It’s publicised that other artists are caring about sound quality. Neal Young comes to mind. So how do you at home validate what’s...

Thanks for the info! I haven't really gotten into active crossovers much yet, although I've considered the 5234 & 5235 before. I plan on using DSP...

My 2bits: I tried 2427's on 2360's and found that the HF was very minimally better since the horn slot width is where the trouble begins about...

The crossection pictured is of a 2420 or LE85, not a 435Be. The 2420/LE85 is decades older than the 435Be. I believe the orange colored silicone...

If you could find a pair of 2427 they were 2426 with a 2" throat. I would drop a pair of 2450's with sl diaphrams on them Have fun! Rob :)